For the Following Applications:

Engine:
-13B
-20B
-26B

Transmission:
-350Z (CD001-CD009 Clutch Fork)
-350ZHR (High Rev JK40C-JK40B Internal Slave Cylinder)
-370Z (JK40C-JK40B Internal Slave Cylinder)
-370ZHR (High Rev JK40C-JK40B Internal Slave Cylinder)

This is an adaptation kit to mate together the Rotary 13B 20B 26B Engines to the Nissan Line of 350Z 370Z 350ZHR 370ZHR Later model transmissions. We came out with this adaptation kit essentially to solve the shifting problem with stock Turbo II FC, and FD 5-speed transmissions. We have seen, through our experience, the inability for proper syncro-mesh at higher RPM's (7000+) on the stock Mazda FC, and FD transmissions. Also the cost of the stock transmissions is soaring such that you can afford this swap for the same cost.

We have came up with a solution to this solve this long standing problem, using the Nissan 350Z and 370Z "High-Rev" transmission. These transmissions come equipped with Triple cone syncros, and the ability to shift above 7000+ RPM comfortably (This requires 4-puck, some 6-puck clutch discs, or small twin-disc Clutch system to work efficiently). This high RPM shifting capability is something you will not get from a Tremec based T56 or TR6060. No longer will you have to resort to an expensive dog-box or costly sequential gear box to solve this problem.

What is Included:

-Adapter plate (works with 93-02 FD ReW Automatic Bell-housing only (at the moment, RX-8 bellhousing will be available in 2020)
-Flywheel adapter (you must use an Aftermarket FC Turbo 2, or FD flywheel, along with the stock Automatic Counter-weight)
-ARP Flywheel Bolts for Flywheel Adapter
-Pilot Bushing for Rotary Eccentric shaft

Options to choose from the Drop Down:
-Slave Cylinder
-Flywheel or Flywheel Adapter
-Shifter (Recommended for FD RX-7)

You Will Need to Supply the Following:
-T56 Slave Cylinder (throwout bearing)
-13B REW Automatic bell housing
-FC FD Counter Weight
-FD Automatic Flexplate (required if you do not select the billet flywheel)
-FD Automatic Starter
-FD Automatic Counter-weight
-Automatic Rear housing is required.

*Any questions or to check if in stock please give us a call at 803-792-7189*