1UZ-FE to KA24DE/SR20DET Transmission Swap Kit

For the Following Applications:
Engine:
-1UZFE

Transmission:
-KA24DE Transmission (240SX S13)
-SR20DET Transmission (S13, S14)

What is Included:
-1UZFE Adapter Plate
-Engine Side Bolt Kit
-Pilot Bearing Adapter

Options to Choose From the Dropdown's:
-Transmission
-Clutch Release Bearing
-Clutch System (Clutch Disc, Pressure Plate, Clutch Bolts, Clutch Tool)
-Flywheel
-1UZFE Motor Mounts
-Driveshaft and Material

You are Required to Procure the Following:
-The bolts to fasten the adapter plate to the transmission (as these bolts are from the Nissan transmission of your choice. I.E. if you pick a 350Z transmission, you would use the stock factory 350Z transmission bolts to fasten it onto the adapter plate.)
-1UZFE Automatic Flex-plate (needed for all 350Z, 370Z. 300ZX transmission swaps) (you do not need these components for SR20DET transmission or KA24DE transmissions)
-1UZFE Automatic Flex-plate "Thick" Spacer (needed for all 350Z, 370Z. 300ZX transmission swaps) (you do not need these components for SR20DET transmission or KA24DE transmissions)
-1UZFE Automatic Flex-plate "Thin sheet metal" Spacer (needed for all 350Z, 370Z. 300ZX transmission swaps) (you do not need these components for SR20DET transmission or KA24DE transmissions)
-Flywheel bolts (ARP 45mm under head length for 350Z, 370Z, 300ZX transmissions) (ARP 4AGE Flywheel bolts)


**ALL S-CHASSIS DRIVESHAFTS ARE CUSTOM MADE TO ORDER** 
We will email you the proper paperwork to the email address you provided during checkout in order to get the required measurements and create and ship your driveshaft usually within 1-2 business days.

 This one adapter plate allows you to bolt together your choice of three different Nissan transmissions. You can pick either 350Z(Z33) six speed, 370ZHR/350ZHR(High Rev transmission) six speed, or KA24DE 5-speed transmissions. This adapter plate comes with the hard-to-find M12x1.25 bolts needed to fasten this adapter to the engine, however the adapter does not come with the bolts to fasten the transmission to the adapter plate. Due to the starter location, and other conflicting bolt holes, not every bolt that goes through your transmission will thread into this adapter plate, however there are plenty threaded holes to safely bolt the transmission to the adapter.

*Any questions or to check if in stock please give us a call at 803-792-7189*