Lexus IS300 (IS400) V8 1UZ-FE to CD009 (350Z/370Z 6-Speed) Manual Transmission Swap Kit

For the Following Applications:

U1 Aisin Automatic Bellhousing (UZZ30, JZX100, JZS147)
U3 Aisin Automatic Bellhousing (JZX161, VVTi 2JZGTE)

Engine:
1UZFE

Transmission:
350Z (CD001-CD009-Has Clutch Fork)
350ZHR (JK40 Series-No Clutch Fork, Internal Slave Cylinder)
370Z (JK40 Series-No Clutch Fork, Internal Slave Cylinder) 

What is Included:

-U1 or U3 Adapter Plate
-Input Shaft Seal
-Bolt Kit
-Pilot Bearing

Options to Choose From the Dropdown's:
-A340 Bellhousing
-Transmission
-Clutch System (Clutch Disc, Clutch Bolts, Clutch Tool, Pressure Plate)
-Flywheel
-Slave Cylinder
-Crossmember + Mount
-Shifter
-Driveshaft + Material

We have created a new way to get a V8 1UZFE Engine, With a 6-speed into your IS300, using any of the Nissan 350Z/370Z 6-speed transmissions. This Kit will get the 350Z(CD009) or 370Z(JK40x) 6-Speed Transmissions bolted up into your 1UZFE inside your IS300 with minimal effort!

You Will Need to Supply the Following:
-Motor Mounts From a GS400 (recommended, unless you make your own motor mounts)
-Aisin A340 Automatic transmission J1 or J2 bell housing (You can purchase this in the drop-down menu below) (found on 1991-1997 SC300 Automatics, early model Automatic GS300, and most JDM 1JZGTE vvti Automatic Engine/Transmission swaps)
-Bell housing bolts to the block (this will come off of whichever automatic transmission you pull off the bell housing from)
-IS300 Manual Clutch Pedal Assembly
-IS300 Manual Master Cylinder (Toyota Celica GTS master cylinder works for IS300 also)

*Any questions or to check if in stock please give us a call at 803-792-7189*