For the Following Applications:
-U1 Automatic BellHousing (Found in SC400 91-97 Engines)
-U2 Automatic BellHousing (Found in SC400 98-00 Engines)
350Z Z33 (CD001-CD009-Has Clutch Fork)
350ZHR Z33 (JK40 Series-No Clutch Fork, Internal Slave Cylinder)
370Z Z34 (JK40 Series-No Clutch Fork, Internal Slave Cylinder)
This adapter plate works with the Aisin A340 A341 Automatic Bell housing from the 1UZ family of engines mated to these automatic transmissions. It is specific to run the 1UZFE or 3UZFE "U1" automatic bell housing for current stack height requirements and proper clutch release systems.
This family of transmissions spans from 1990-2007, there are hundreds of thousands of these automatic systems sitting in automotive recycler's yards right now.
THIS SYSTEM REQUIRES NO BEATING OF THE FIREWALL, NO MACHINING DOWN OF THE BELL HOUSING, NO B.S.
What is Included:
-A340 U1, U2 Adapter Plate
-Input Shaft Seal
-A340 Bolt Kit
-A340 Pilot Bearing
You Will Need to Supply the Following:
-Master Cylinder [Toyota Land Cruiser Master Cylinder works] (our clutch line works with all SC300, Supra, Celica, and Nissan master cylinders)
-Shift boot (for stock plastic, if racecar or no interior don't worry about it)
-1UZFE/3UZFE "U1" Bell housing
-3.5" Angle grinder with cutoff wheel to cut off stock 350Z bell housing
Options to Choose From the Dropdown's:
-Slave Cylinder and Clutch Line
-Adapter Plate Finish
*Any questions or to check if in stock please give us a call at 803-792-7189*